TheWorkshopBlueprint logo THEWORKSHOPBLUEPRINTDIY BUILDING PLANS
← All plans

Tilt-Out Laundry Hamper Cabinet Plan

Tilt-Out Laundry Hamper Cabinet Plan plan cover
$11.95 Buy Now

Premium by design, safer by design - and every claim below names a real feature drawn into the plan itself. Not a standard off-grid kit approach carried into furniture: this is the top-of-the-line, above-and-beyond-the-old-style generation of TheWorkshopBlueprint plans, with verified measurements throughout - every dimension is checked two independent ways before the first cut.

THE BUILD: a furniture-grade plywood laundry cabinet, 36 in wide x 36 in high x 16 in deep, with two tilt-out hamper bins (fronts 16-5/8 x 25 in) that tilt to a stay-limited 30 degrees and close flush. Each bin is rated 25 lb of laundry, with supports and anchoring sized for twice the rating.

SAFER BY DESIGN - THE FEATURES ARE IN THE DRAWINGS: (1) NO FREE-SWINGING, PINCH-PRONE BINS - stays on both sides of each bin stop the tilt at a measured 30 degrees, side clearances are a deliberate 1/8 in, and the plan gates a loaded ten-cycle swing test plus a foam pinch-zone demonstration before the cabinet is used. (2) MANDATORY WALL ANCHOR - a loaded, both-bins-open cabinet is top-heavy, so the plan fits two anchor brackets into wall studs with 2-1/2 in screws (about 1-7/8 in of bite in framing) behind a pass/fail anchor gate: the cabinet is not in service until the gate passes. (3) MILDEW DESIGNED AGAINST - six ventilation slots per bay in the cabinet back (twelve total), a bin back panel that stops 6 in short to leave an open air slot, and printed care rules, because damp laundry sealed in a closed box mildews within days. (4) REAL BEARING, NOT SCREW HANGING - bin bottoms rest on 3/4 in cleat bearing inside each bin and on two cabinet support rails giving 1-1/2 in of bearing across the full bin width; every load-bearing part rests on a dimensioned support. (5) NO HEADER BIND - every bin side carries an 8 x 8 in swing-clearance chamfer, proven two ways: arc math in the plan and a full-size cardboard swing template you build and test in the practice stage.

EVERY MEASUREMENT VERIFIED TWO WAYS: cabinet width 3/4 + 16-7/8 + 3/4 + 16-7/8 + 3/4 = 36 in; front stack 3-3/4 + 1/8 + 25 + 1/8 + 6-1/4 = 35-1/4 in, plus the 3/4 in top = 36 in high; opening 25-1/4 in checked against bin front plus gaps; depth 15-3/4 + 1/4 back = 16 in; bin depth 12-3/4 in leaving 2-3/4 in rear clearance; plywood parts 40.8 sq ft against two 4x8 sheets (64 sq ft). Every fastener is bite-checked (box screws 1.25 in, pivot hinge screws #8 x 3/4 in at about 0.65 in, stay screws the supplied #6 x 5/8 in at about 0.55 in, cleat and rail screws 0.5 in carrying on bearing with glue, anchor screws about 1-7/8 in into studs).

BEGINNER-FIRST, IN DEPTH: terms defined at first use (tilt-out bin, bay, pivot hinge, stay, chamfer, bearing, bite, anchor bracket), a practice-first hinge and stay test plus the full-size swing template and a stud-finding floor-tape trial, 36 continuously numbered steps in 6 stages plus practice, 12 labeled diagrams - one at every technique stage - a stop-and-check after every stage, mistake fixes (header bind, over-tilt, slamming bin, screw print-through, creeping cabinet, musty laundry, uneven gaps), a good/better materials path (standard birch vs Baltic birch plywood; butt hinges vs rated tilt-out pivot sets; chain stays vs folding soft-catch stays), and sourcing with exactly what to order and costs labeled estimates totaling $170-$310.

You receive: the PDF plan only (digital download, no physical product ships) with cut list, materials list, full two-way verification section, and final checklist. Full build plans and material list in the TheWorkshopBlueprint website store at theworkshopblueprint.shop.

Finished size 36 in wide x 36 in high x 16 in deep; two tilt-out bins, fronts 16-5/8 x 25 in, interiors 15-1/8 in wide; tilt limited to 30 degrees; rated 25 lb laundry per bin
Materials estimate $170-$310 (estimate: 2 sheets 3/4 in plywood plus 1/4 in back piece, pine or poplar solid stock, pivot hinges, stays, anchor kit, pulls, screws, glue, finish)
Skill level Beginner

See more plans in Furniture