TheWorkshopBlueprint logo THEWORKSHOPBLUEPRINTDIY BUILDING PLANS
← All plans

Goat Milking Stand Plans

Goat Milking Stand Plans plan cover
$12.95 Buy Now

Build a milking stand a goat walks up, trusts, and stands quietly on: a 48 x 20-in. platform with the deck 20 in. high, a sliding-bar head gate (stanchion) with four pinned settings — Small 4 in., Standard 5-1/2 in., Large 7 in., Open 11 in. — sized from real goat neck measurements and centered at every setting, a feed trough that comes off its support cleat for scrubbing (two screws out), and a cleated ramp laid out by arithmetic (a 20-48-52 triangle, 22.6 degrees) instead of by eye.

This is a true beginner plan: 10 illustrations, a glossary that defines every term where it is first used (stanchion, head gate, cleat, index pin, guide channel, racking, kerf, and more), a practice head-gate build on scrap before the real one, 43 continuously numbered steps with a stop-and-check after every stage, a measurement-verification section showing all the math (deck height, gate opening range for Nigerian Dwarf through full-size dairy does, ramp angle and length), fixes for the mistakes first-time builders make, and a final completion checklist. Animal safety is built in, not bolted on: a two-pin quick release that opens in under five seconds, sanded-round neck bars, no sharp edges, and no hoof- or jaw-sized trapping gaps.

Materials: 2x4, 2x2, and 1x2 lumber, one 1x6, one sheet of 3/4-in. plywood, exterior screws, and two 3/8-in. quick-release index pins — ordinary lumberyard stock, no welding and no metal fabrication. A complete cut list with a board-by-board cutting layout is included.

DIGITAL DOWNLOAD — plans only. This listing is for the PDF building plans; no physical stand, lumber, or hardware is included or shipped. Full build plans and material list in the TheWorkshopBlueprint Etsy shop.

See more plans in Coops & Animal