Garden Obelisk Trellis Plan
Build a classic garden obelisk trellis — 72 inches tall, 24 x 24 inch base tapering to 8 x 8 inches at the top, with a pyramid cap, finial ball, and ground stakes — from 1x2 cedar with screws only. No fancy joinery.
This is a beginner-first plan, not a one-page cut list. It defines every term at first use, starts with a practice frame on scrap wood before you touch the good cedar, and shows the full taper math (8 inch inset per side over 72 inches, width formula, and a computed length for every one of the 24 rungs) so every part fits the first time. Every technique stage has its own diagram (9 illustrations), a stop-and-check checkpoint, and fixes for the common mistakes. Every screw is verified on paper: #8 x 1-1/2 inch screws give 3/4 inch through the rung and a full 3/4 inch bite into the leg, and every rung rests on the full 1-1/2 inch face of its legs — real bearing, no butt joints.
You receive: a 12-page PDF plan with cut list, materials list, tool list, 30 continuously numbered steps, 9 diagram figures, measurement verification, mistake fixes, and a final checklist, plus a materials estimate of $55-$85 in cedar.
DIGITAL DOWNLOAD: this listing is for the PDF building plan only. No physical product will be shipped. Print it or build from a tablet in the shop.
Full build plans and material list in the TheWorkshopBlueprint Etsy shop.
