Folding Sawhorse Pair Plans
Build a pair of folding sawhorses — each 36 in. long, 32 in. tall, with a 42-3/8 x 17-1/4 in. footprint — that collapse to about 9 in. thick for storage. Two leg frames per horse splay at 15 degrees, hinge under a two-layer top with a replaceable sacrificial cap, and lock open with two-piece folding braces and lock pins. The two frames are different widths (17-1/4 in. and 14 in.) so they nest past each other when folded instead of colliding.
This is a true beginner plan: 16 illustrations, a glossary that defines every term in plain language, a practice-first stage (angle cuts, a piloted screw joint, and a bolted lap joint on scrap) before the build, 32 build steps numbered continuously, a stop-and-check checkpoint after every major stage, fixes for the common mistakes, a measurement-verification section that shows all the arithmetic, and a final completion checklist.
Every load joint rests ON a support — cap on main bar, main bar on top rails, rails on leg tops — and every screw is listed with its length, the thickness it passes through, and its bite into the second piece (always at least 3/4 in.). Bolt grips, brace geometry, the nesting clearance, and the height stack (28.5 x cos 15 + 1.5 + 1.5 + 1.5 = 32 in.) are all shown and checked. Working load: 500 lb per horse spread along the top.
DIGITAL DOWNLOAD — this listing is for the PLANS only. No physical sawhorses, lumber, hardware, or kit is included. Instant-download 42-page PDF, print it at home or use it on your phone in the shop. Full build plans and material list in the TheWorkshopBlueprint Etsy shop.
