TheWorkshopBlueprint logo THEWORKSHOPBLUEPRINTDIY BUILDING PLANS
← All plans

Cat Tree DIY Plan

Cat Tree DIY Plan plan cover
$12.95 Buy Now

Build a sturdy carpeted cat tree with two sisal scratching posts and two perches — no wobble, no side-mounted shelves, no guesswork.

Finished size: 24 x 24 in base, 37-1/2 in tall. A 36 in tall post carries the 20 x 20 in top perch (with a raised safety lip), and a 24 in post carries the 18 x 18 in lower perch. Both perches rest ON TOP of their posts with support cleats, so your cat's weight is carried by real bearing, not by screws alone. The wide 24 in base and a worked stability calculation (15 lb cat, doubled for jump landings) keep the tree planted — and you prove it with a 15 lb edge test before your cat ever climbs it.

WHAT YOU GET
Instant-download PDF plan: 36 pages, 29 steps, 29 diagrams — one diagram for every step, drawn to the measurements in the text.

INSIDE THE PLAN
- Beginner-first glossary: every term (bearing, bite, pilot hole, plumb) defined in plain language before it is used
- Practice-first exercise: learn the sisal wrap on a 12 in scrap post before touching the real posts
- Full cut list and materials list — one 48 x 48 in half-sheet of plywood, one 8 ft 4x4, one 8 ft 1x2
- Measurement-verification section: every height, board, rope length (278 ft of sisal, buy 300 ft), carpet size, and screw length shown as arithmetic you can check
- Every fastener checked for reach: 3 in lag screws bite 2-1/8 in into the post ends; perch screws bite 1-5/8 in; cleat screws 1-1/4 in; lip screws stop 7/8 in short of the surface
- Stop-and-check checkpoint after every stage, a mistake-fixes section for the 9 most common errors, and a final completion checklist

SKILL LEVEL
True beginner. If you can measure, drill, and drive a screw, you can build this in one afternoon.

This is a digital download (PDF). No physical item will be shipped.

See more plans in Coops & Animal