TheWorkshopBlueprint logo THEWORKSHOPBLUEPRINTDIY BUILDING PLANS
← All plans

Bamboo Folding Camp Table Plan

Bamboo Folding Camp Table Plan plan cover
$9.95 Buy Now

Build a bamboo folding camp table — 36 x 24 inch slatted bamboo top, 27-1/4 inches tall, folds flat to about 5 inches — from bamboo poles and flat bamboo slat stock, joined the way bamboo wants to be joined: stainless pivot bolts through solid node material, hardwood pins, and waxed-cord square lashings. No screws into hollow poles, ever.

This is a beginner-first plan, not a one-page cut list. Every term is defined at first use (culm, node, internode, X-frame, pivot bolt, lock bar, stretcher, bearing, frapping), you practice the pivot joint and the full square lashing on scrap poles first, and every technique step has its own labeled diagram — 12 figures, including a pivot-bolt cross-section with the reach math, the 45-degree X geometry, and the lock-bar detail.

Stability is engineered, not hoped for: each X-frame opens at 45 degrees so its feet spread 25-1/2 inches — wider than the 24 inch top — a locking spreader bar hooks over a stud on each X so the frame cannot scissor shut under load (11-5/16 inch bolt centers, math shown), and two lengthwise stretchers stop end-to-end racking. Every fastener is verified on paper: the 4-1/2 inch pivot bolt passes 3-1/4 inches through both legs and a spacer washer, plus 3/4 inch of washers, locknut, and proud thread, with 1/2 inch of margin. Every slat rests ON two cross-rails — real bearing, dimensioned: 4 + 28 + 4 = 36 inches. Load stated honestly: a camp stove, a pot of water, and supper is about 25 lb; the table is rated 40 lb maximum, centered, and load-tested in the plan.

MANDATORY BAMBOO SECTIONS INCLUDED: (1) Kits & Sourcing — exactly what to order (pole diameters, lengths, counts, slat stock spec, stainless hardware), where to order it, and cost estimates, all labeled ESTIMATE because the kit model is dropship and supplier quotes are still out. (2) Cut Your Own — choosing and cutting culms (including hunting leg sections with a node at the middle), air-drying step by step with honest times (4-8 weeks warm/dry, 8-12 weeks humid, plus 2-4 weeks after treating), and borax/boric-acid preservative treatment step by step (10-14 day soak).

You receive: a PDF plan with materials list, cut list, measurement verification, 46 continuously numbered steps, 12 diagram figures, stop-and-check checkpoints after every stage, mistake fixes, and a final completion checklist.

DIGITAL DOWNLOAD: this listing is for the PDF building plan only. No physical product will be shipped. Print it or build from a tablet in the shop.

Full build plans and material list in the TheWorkshopBlueprint Etsy shop.

Finished size 36 in long x 24 in deep x 27-1/4 in tall open; folds flat to about 36 x 25-1/2 x 5 in
Materials estimate $235-$385 ESTIMATE, bought-pole route, finish, cord, and hardware included (3x 1-1/2in x 8ft poles, 2x 1-1/4in x 8ft poles, 1x 1in x 8ft pole, 5 bamboo slat strips, stainless bolts, dowel, cord, glue, finish) — all prices are estimates until supplier quotes land
Skill level Beginner

See more plans in Bamboo